New Boat: CIY 16

The Calendar Islands Yawl 16

A Sail-and-Oar Dinghy for one or two people

The CIY 16 began as a 19 x 6 1/2-foot daysailer design with a deck and coaming with a bit of Herreshoff flavor. A friend who sails the Goat Island Skiff design by Michael Storer wanted a similar boat -- singlehanding, lightweight, lug rigged sail-and-oar dinghy -- but with a hull shape more amenable to Maine waters. I immediately thought of my CIY lines that I had drawn years ago and that had been sitting untouched and in need of inspiration. I had already put the lines into the computer so I scaled them down and reworked them to make this hull. The specs are:

LOA 15 1/2'

Beam 5' 1"

Displacement ~522lbs

Depth amidships 1'9"

DWL is 3'10" x 13'2"

Cp is 0.54

The hull has a wide plank keel for rolling the boat up and down the beach. The skeg is there for tracking under oars, but the cutaway allows the stern to come through the wind when tacking. The lines are fairly straight forward and full aft. In a breeze she will plane. Yet trimmed on her DWL, the transom is out of the water and the stem is in the water and she'll row fine with 10' oars so long as we keep her light. Construction will be 1/4" plywood: bottom and garboard stitch and glue style, with lapstrake sides, about 5 strakes total for topsides.

It's always fun designing something really new. The next steps are to put in all the planks in the model so look forward to that post. I'll be looking for someone to prototype the boat. Let me know if you are interested. Stay tuned!

Landing School Boat Launching

A great week of learning, teaching and boat launching last week at The Landing School where I instruct in the Wooden Boatbuilding Program. These students just launched a Joel White designed Maine Coast Peapod. It performed great at the launch last Friday. We enjoyed a jaunt in the Kennebunk River during a small craft advisory. We ducked out into some of the swell, three of us aboard, to see how mannerly a Peapod is in these conditions. Even I was struck -- again -- by how well behaved a sea boat the 'pod can be, whether bow to or stern to the waves. We turned around and rushed in with the swell and tide as the regular Fall start students watched on and snapped photos.

With most of my work in plywood, CNC cutting and making boat kits, it is a joy to help students learn to build a boat in solid wood and one that does not depend on epoxy for holding it all together or fairing over mistakes!

Finer points of final assembly.

Check out the Programs at The Landing School on the Rocky Coast of Maine.

This year has been a crazy one and we will be unable to attend the Waterfowl Festival as we usually do...

...However...

 ...there is another new, and for true enthusiasts of model boats, perhaps more interesting, show being held in Oxford, Maryland on Saturday, November 9^th. You may or may not know their names, but the lineup of talented model makers is quite impressive, thanks to Master Model Maker Ed Thieler who organized the event.

I don't know the whole list of model makers that will be in attendance, but I do know that in addition to Ed Thieler (Chesapeake vessel expert noted for the precision and beauty of his boats and dioramas), Capt. Eddie Somers (Smith Island native and Chesapeake boat expert), Capt. Don Willey (specializes in Chesapeake and various other craft and is a Marlinespike expert), Capt. Ron Fortucci (Half-hulls, Pond Yachts, professional cabinet maker and sailor), Jim Wortman ( model maker and historian from New York's famous South Street Seaport Museum)  and others will be there, many of whom will be talking about their models and/or the history of the boats they've replicated of the Chesapeake Bay. We'll be there too, with our models and books and we will be discussing “photogrammetry”.

Whether you know their names or not, their works are among the finest in the region and the models that will be there will be something to behold. It will be a rare assembly of such highly talented artists of the type. Some models will be for sale (if you're looking for something different for Christmas), while other models, for display only, will make you say “Wow!”

As great as the Waterfowl Festival is, it's worth taking the side trip to Oxford. You won't find anything like this at The Waterfowl Festival and if you like fine carvings and art, you are certain to love the model boats that will be at this show. After all, the heritage that makes the Waterfowl Festival what it is could not have been without the boats.

Come to the Model Show at the Oxford Community Center, in Oxford, Maryland, from 10:00am to 4:00pm on Saturday, November 9^th, 2012.

A Deblois Street Dory

to The Compass Project in Portland, Me is building a DSD with a group of kids and they are doing a great job.

The boat is built like dories have always been built, using the bottom to erect stem, frames, and transom, then turning over the boat upside down on a strongback. Everything is plumbed and braced then planking begins.

Here the garboard has been installed and the sheer clamp is being fit. This is the only departure from traditional dory construction, the incorporating of the clamp helps tie together the frames into plumb and lock in the ends of the boat. It is a bit of a 3D puzzle!

How to Sail the Lug Yawl: REPOSTED

My friend and fellow boatbuilder in the Northwest, James McMullen, created a very useful set of drawings to help people learn how to use our favorite sailing rig, the Lug-Yawl. For sail & oar boats you cannot have a more versatile and fun rig for your boat. Clint draws these rigs into most of his designs, such as the Calendar Islands Yawl or the Goat Island Skiff with a mizzen. Please look at these drawings and imagine how this rig could fit into your own sailing.

Now that you have seen these diagrams you can also see how useful the mizzen would be for switching from sailing to rowing and vice versa. While the mizzen is hauled in, the boat will keep herself pointing into the wind so the sail can be raised and lowered without filling and causing the boat to fall off one way or the other. I have found the mizzen useful for stopping and taking a break or for restowing gear or for dealing with safety matters. In these cases, it is best to learn to "heave-to" so that your boat doesn't lose too much ground. That is one drawback of lying head-to-wind under mizzen: you need to have plenty of leeway...no boats, rocks or land to get blown down upon. The advantage of heaving-to is that you don't lose too much ground at all. We make light, strong Birdsmouth masts and spars and have intimate knowledge of the Lug-Yawl.

Morbihan 2011

This video was made by Voiles et Voiliers in 2010 after my visit there to meet and sail with my friend Francois Vivier. We sailed from Pornichet to the Gulf of Morbihan in his 25' gaff-sloop called Pen Hir and for 3 days sailed in company with thousands of boats during Semaine du Gulfe Morbihan. It is an experience I will never forget and I cannot wait to return. Enjoy! You will see me at about 4:00. I don't remember what I said; if you speak French you can remind me!You will notice all the Vivier boats sailing everywhere. That was not staged...there were simply so many Vivier boats that we were able to see the entire design catalog sailing and rowing, from 12' dinghies to 50' traditional yachts! I have had a few complaints that the video did not load, but it seems to work. Give it time or check your connection.
Voiles et VoiliersLa voile-aviron expliquée par François Vivier by voilesetvoiliers

Sneaking up on Perfection

For the first time in my short design-build career, I am finally in the stage I have longed for, that is, to be working on mk II and mk III+ versions of already successful boat models. Thus the blog title, "Sneaking up on Perfection". This is certainly the case with the Echo Bay Dory Skiff (EBDS), my first kit, based on a design a friend had drawn 26 year ago. I've built many Echo Bay's with families, corporate teams, and students. When it came time to start the kit business, it was obvious to begin with the EBDS. At that time, I had no idea how powerful 3D modeling programs could be and it didn't matter, I was a long way from knowing how to draw a line segment in 2-dimensions!

The original Echo Bay (left) at 26 years old and the mkIII version as a kit (right). 

The EBDS is the last of my boats to get modeled in the computer. After a couple weeks of side-work, I have just finished the new model. The improvements are:

• improved sheer for aesthetics and sailing purposes
• slightly longer (now 11' 10" LOA)
• increased freeboard (about 1")
• more interior options: enclosed plywood tanks for flotation and 2 different solid-wood thwart arrangements.
• improved sprit sail shape and new lug rig option
• dedicated oar plan for the EBDS
• paper plans will be available as well as full size patterns (FSPs) and a plywood kit

The new lug rigged option

Next step is to break the model apart and develop the 2D geometry. I'll start by unrolling the planks and flattening the bulkheads, frames, and other hull structure. This process of generating 2D geometry takes very little time (maybe 2-3 hours). The time consuming part is drawing the plans for how to make these parts from scratch and drafting the construction drawings so she can be built as designed. This will take another couple weeks of side work. Then the CAD files for cutting on a CNC machine will need to be made, another couple days of side work. 

This model shows the standard solid wood thwart arrangement, but a plywood (flotation) tank option is a new addition.

Phew. A lot for a 12-footer. But on par for creating what will be the best 12-foot sail and oar skiff the market has seen for a long time, perhaps ever! But this photo shows why I do it: adventures with the kids.

A recent outing in the EBDS with the skipper (the one in the stern).